Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle management, Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications.
The SC815E is a small form factor, MicroATX motherboard that is well suited to embedded applications. The dimensions of the board are small enough such that the SC815E can also be used in a FlexATX chassis. It is therefore a very versatile motherboard suitable for a wide variety of applications. It is available with either CeleronTM or Pentium® III processors in FC-PGA package providing scalable performance and the option to choose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The SC815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the SC815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications.
| FEATURE | FUNCTION | DESCRIPTION |
|---|---|---|
| Processor | Socket FSB |
370-pin PGA ZIF for Intel Celeron and Pentium III processors in FC-PGA package 66MHz, 100MHz, 133MHz operation |
| Chipset | Intel 815E chipset with ICH2 | |
| Memory | Type Capacity ECC/Parity |
Two 168-pin DIMM sockets for PC100 and PC133 SDRAM Maximum of 512MB Not supported |
| Video | Controller Display Cache Frame Buffer Flat Panel DFP/DVI |
3D graphics controller integrated in 815E chipset Optional display cache via GPA module in the AGP slot Stored in main memory (holds 2D and 3D data) Silicon Image SII164 PanelLink controller Cabled DVI or DFP connector from header Optional DVI or DFP adapter for rear I/O mounting |
| Audio | Controller Connectors |
AC97 v2.1 CODEC using Analog Devices AD1885 (with integrated headphone amplifier) ATAPI connector for CD-ROM (stereo) ATAPI connector for telephony (mono) 7-pin connector for external AC97 CODEC Stereo line out 3.5mm jack socket (can be used with headphones) Stereo line in 3.5mm jack socket Mono microphone 3.5mm jack socket with phantom power, suitable for electret microphones |
| Network | Controller Connector |
Intel ICH2 integrated MAC with Intel 82562 PHY IEEE 802.3 10Base-T and 100Base-TX compatible RJ45 with LEDs for line activity, link integrity and line speed |
| IDE | Devices Types |
Two Ultra ATA/100 or ATA/66 interfaces via 40-way boxed header Supports ATAPI, LS120 and ZIP drives |
| Floppy | Types |
Supports standard 2- and 3-mode 3.5" floppy drive |
| Mechanical | Dimensions Compliance PCB I/O shield |
9" x 7.5" MicroATX and FlexATX compliant Four layers Standard ATX available options for RJ45 Ethernet and DVI/DFP connectors |
| I/O | Parallel Port Serial Ports IrDA USB Keyboard & Mouse GPIO |
25-pin D-type supporting bi-directional, EPP and ECP modes COM1 on 9-pin D-type, COM2 via 10-way header Supported in place of COM2 via front panel connector Dual stacked USB 1.1 rear connector Motherboard header for single USB port USB interface via AGP slot Swappable PS/2 connectors Phoenix keyboard code Motherboard headers for keyboard and mouse ports Eight GPIO lines for control functions or front panel indicators |
| Expansion Slots | PCI ISA AGP |
Three dedicated bus master PCI 2.2 slots Connector for PCI/ISA bridge support via PCI slot 4X AGP slot |
| System Management | Monitoring of voltage, temperature and fans Anti-tamper security CPU fansink and system fan speed control |
|
| Power Management | PCI PME, ACPI 1.0, APM 1.2 | |
| Power Supply | Type Typical |
Support for hard- and soft- switched PSU 35W |
| Battery | Lithium coin cell (5 years operating life typical) Optional super-cap for 1 hour backup |
|
| BIOS | Type Special Features |
PhoenixBIOS 4.0 Release 6.0 Customizable defaults, customer logo, silent boot, automatic configuration |
| Operating Systems | Windows® 95, Windows 98, Windows 2000, Windows NT® Qualification of real time and other operating systems subject to demand | |
| Safety Compliance | Designed for compliance with UL1950, EN60950 and IEC60950 | |
| EMC Compliance | Designed for compliance with EN55022, EN55024 and FCC Part 15 Class B | |
| Environment | Operating Temp Storage Temp Relative Humidity |
0°C to 55°C -40°C to 85°C 5% to 95% non-condensing |
Call for pricing and availability.
Refer to the order codes below.
SC815E uATX without integrated DVI, RoHS
PRODUCT CODE: SCL03-0-0
SC815E ATX with integrated DVI, RoHS
PRODUCT CODE: SCFPL03-0-0
I/O shield for SCL03-0-0, RoHS
PRODUCT CODE: ATX-L 81X IOSHLD
I/O shield for SCFPL03-0-0, RoHS
PRODUCT CODE: ATX-FPL 81XIOSHLD
DVI connector / bracket assembly, RoHS
PRODUCT CODE: DVI_CABLE-R
