

The Endura AB915GM FlexATX motherboard is based on Intel’s long life, embedded 915GM Express chipset. Designed for high performance and low power, this is the first Intel Pentium® M chipset to introduce support for PCI Express, the latest high speed serial interconnect standard. For example, the PCI Express x1 slot delivers 500 MB/s, over 3.5 times the bandwidth of a conventional PCI slot at 133 MB/s. In addition, the 915GM has integrated third generation graphics with Intel® Graphics Media Accelerator (GMA) 900 which supports dual independent displays via two DVI ports, analog VGA and an 18-bit, dual channel LVDS interface. Integrated Intel® High Definition Audio provides 24-bit, two channel, stereo audio with support for 192 kHz quality audio. With a front side bus of 533MHz, the Endura AB915GM supports the latest Intel® Pentium® M and Celeron™ M high performance, low power processors. Flexible memory support is available with DDR2 533 and DDR2 400 dual channel memory with a maximum of 2GB. Eight USB 2.0 ports (seven with MM/SD slot) provide support for high-speed I/O peripherals with 40X the speed of USB 1.1. Two SATA ports facilitate data transfers at 150 MB/s for the SATA hard drives and optical drives. An ATA/100 port is available for legacy hard drives and optical drives.
All RadiSys Endura motherboards are designed for long life (5-7 years typical). Components are chosen to meet the more demanding needs of embedded applications such as 24/7 operation. RadiSys provides full product life cycle management, including integration support, revision control and sustaining support. Combined with the benefit of time-to-market designs, the RadiSys Endura product line enables customers to achieve fast time to money and low costof- ownership.
| Feature | Function | Description |
|---|---|---|
| Processor | Type | Support for Intel® Pentium® M and Celeron™ M processors |
| Socket | 479-pin PGA socket | |
| FSB | 533MHz and 400MHz system bus | |
| Chipset | Type | Intel® 915GM Express chipset with Intel® ICH6-M |
| Memory | Type | Two sockets for DDR2-533 (PC2-4200) and DDR2-400 (PC2-3200) SODIMM modules |
| Capacity | Up to 2GB of system memory | |
| Flash | MM/SD card slot (only on ABW03 and ABF03) | |
| Video | Type | Integrated Intel® GMA900 (Graphics Media Accelerator) |
| Resolution | DVI: 1600 x 1200 UXGA at 60Hz, LVDS: 1920 x 1200 WUXGA | |
| LVDS | On-board 18-bit dual channel LVDS flat panel interface | |
| DVI | Two on-board DVI interfaces, DVI-I and DVI-D (analog via DVI-I interface) | |
| Audio | Type | Intel® High Definition Audio subsystem using Sigmatel STAC9200 audio codec providing two channel stereo audio |
| Connectors | Two auto-sensing jack sockets on the rear I/O panel and three ATAPI connectors for CD Input, Line Out and Mic In | |
| Ethernet | Controller | Single 10/100 Ethernet using integrated MAC and Intel 82562GZ transceiver or single Gigabit Ethernet using Intel 82573V PCI Express Ethernet controller |
| Expansion | PCI Express | Two x1 PCI Express slots |
| PCI | Two 32-bit, 33MHz bus master PCI slots | |
| Mini Card | PCI Express Mini Card slot | |
| Power Management | ACPI | ACPI 2.0 supporting states S0, S3 (suspend to RAM), S4, S5 and C0, C1, C2, C3 |
| System Management | System Monitoring | Voltage, temperature and fan monitoring (3 fans) |
| Lithium cell voltage monitoring | ||
| Automatic fanspeed control based on thermal monitoring | ||
| Watchdog | Programmable watchdog timer | |
| Management | Product Identification Block | |
| SMbus | SMbus header | |
| Power Supply | Type | Support for hard- and soft- switched power supplies |
| Supports either ATX and ATX12V power supplies | ||
| Connector | 2 x 10 power connector | |
| Battery | Lilthium coin cell (5 years operating life typical) | |
| BIOS | Customizable Phoenix FirstBIOS™ notebook Pro-based | |
| Includes video BIOS and network boot | ||
| Customizable logo and BIOS settings | ||
| I/O | USB | Eight USB 2.0 ports – four on rear I/O panel and four on headers (ABW00 and ABF00 have three and ABGD00 has four headers) |
| Firewire | IEEE 1394b available on ABF00 product SKU | |
| GPIO | 13-bit General Purpose I/O header with LCD character display support | |
| Serial Ports | Not supported | |
| Parallel Port | Not supported | |
| Disks | SATA | Two Serial ATA (SATA) headers |
| IDE | One Ultra ATA100 interface | |
| FDD | Only supported via a USB port | |
| Operating Systems | Windows XP | |
| Windows XPe | ||
| Windows 2000 | ||
| Red Hat Enterprise Linux WS v3 | ||
| Novell SUSE Linux Professinal 9.2 | ||
| Knoppix Linux 3.7 | ||
| Safety Compliance | Evaluated in accordance with UL60950, EN60950 and IEC60950 | |
| EMC Compliance | Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B | |
| Physical Specifications | |||
|---|---|---|---|
| Environment | Temperature | Operating | 0°C to 70°C |
| Storage | -40°C to 85°C | ||
| Relative Humidity | 5% to 95% non-condensing | ||
Call for pricing and availability.Refer to the order codes below.
AB915GM FlexATX with Gigabit Ethernet, single DVI and IEEE 1394b, RoHS
PRODUCT CODE: ABF03-0-0
AB915GM FlexATX with 10/100 Ethernet and single DVI, RoHS
PRODUCT CODE: ABW03-0-0
AB915GM FlexATX with Gigabit Ethernet and dual DVI, RoHS
PRODUCT CODE: ABGD03-0-0
I/O Shield for ABW03 and ABGD03, RoHS
PRODUCT CODE: ATX AB IOSHLD
I/O Shield for ABF03, RoHS
PRODUCT CODE: ATX-F AB IOSHLD
Fansink for AB915GM, RoHS
PRODUCT CODE: FNSNK AB915GM R