Endura LS855

Endura 855GME uATX Pentium M Motherboard

Description

ADVANCED PERFORMANCE

Based on Intel mobile technology, the Endura LS855 motherboard is targeted specifically at low power embedded computing applications. The Intel Pentium M processor has been designed with a high performance, low power micro-architecture and includes a power optimized 400MHz System Bus and 1MB level 2 cache. Using Enhanced Intel SpeedStep™ technology, this enables the Pentium M to achieve mobile performance at very low power using real-time dynamic switching of the voltage and frequency between multiple performance modes.

“SILENT” OPERATION

The Endura LS855 is able to provide automatic fanspeed control based on thermal monitoring under control of the BIOS software. This is ideal for “silent PC” applications where the processor fan can be run at very low speed using subject to the performance demands of the application.

DUAL DISPLAY INTERFACES

The on-board LVDS flat panel display interface can be used in conjunction with the integrated Intel Extreme Graphics 2 analog VGA output to provide dual independent display interfaces. With the use of an ADD card it is also possible to provide a digital display interfaces such as DVI or a TV-out interface. This is particularly useful for transaction terminal applications such as ATMs and kiosks, point of sale applications and industrial control systems.

LOW COST OF OWNERSHIP

With long life products (5+ years), revision control, product life cycle management, engineering support, high quality design and manufacture, RadiSys is able to meet the true needs of the embedded market place, enabling customers to achieve a low cost of ownership with Endura motherboards.


Feature Summary

  • microATX 9.6” x 9.6”
  • Intel® Pentium® M and Celeron® M processors
  • 479-pin PGA socket
  • 400 MHz FSB
  • Two DDR SDRAM sockets
  • Support for DDR266 and DDR333
  • Up to 2GB system memory
  • ECC support
  • Intel® 855GME chipset
  • Intel® Extreme Graphics 2
  • Dual independent displays
  • 24-bit, single channel LVDS
  • AC97 audio
  • Three PCI slots
  • AGP 4X slot (with ADD support)
  • Six USB 2.0 ports
  • Two ATA/100 ports
  • 10/100 Ethernet controller
  • Phoenix FirstBIOS™ Notebook Pro
  • User-defined BIOS settings
  • Customizable BIOS logo
  • System monitoring
  • Automatic fanspeed control
  • Watchdog timer
  • GPIO port
  • RoHS 6 Compliant
rohs

Specifications

FEATUREFUNCTIONDESCRIPTION
Processor Type Support for Intel® Pentium® M and Celeron® M processors
Socket 479-pin PGA socket
FSB 400MHz system bus
Chipset Type Intel® 855GME chipset with Intel ICH4
Memory Type Two sockets for DDR200 (PC1600), DDR266 (PC2100) and DDR333 (PC2700) DIMM modules
Capacity Up to 2GB of system memory
ECC Standard and ECC memory support
Video Type Integrated Intel® Extreme graphics 2
Resolution 1600 x 1200 pixels with 32-bit color support at 85Hz
LVDS On-board 24-bit single channel LVDS flat panel interface
30-pin shielded connector for VDL / VCL
7-pin backlight control connector (DBL)
AGP/ADD AGP 4X / ADD slot with integrated retension mechanism
Dual DVO channels (single or wide)
Supports LVDS, DVI, DFP, TV-out via ADD cards
Audio AC97 Analog Devices AD1885 for AC97 v2.1 CODEC
Rear Connectors Mic, Line Out and Line In jacks on rear panel
On-board Connectors CD In, AUX In, Line Out ATAPI connectors on-board
Network Controllers Intel 82551ER for single 10/100 Ethernet (without Wake on LAN not support)
Intel 82551QM for single 10/100 Ethernet (with Wake on LAN support)
Connectors RJ45 rear panel connectors, on-board header for external LEDs
Expansion PCI 3 dedicated bus master 32-bit PCI 2.2 slots
Power Management PCI PME, ACPI 1.0b, APM 1.2
System Management Monitoring Voltage, temperature and fans
Automatic fanspeed control based on thermal monitoring
Anti-tamper security
Watchdog Programmable watchdog timer
SMbus SMBus header
Power Supply Type Support for hard- and soft-switched power supplies
Must conform to ATX12V specification, no requirement for -5V supply
Battery Lithium coin cell (5 years operating life typical)
BIOS Customizable Phoenix FirstBIOS™ notebook Pro-based
Customizable logo and BIOS settings
I/O USB Six USB 2.0 ports – four on rear I/O panel and two on headers
GPIO 13-bit General Purpose I/O header with LCD character display support
Serial Ports COM1 on 9-pin D-type, COM2 via 10-way header
Parallel Port 25-pin D-type supporting bi-directional EPP and ECP modes
Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors
Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED
IDE Devices Two Ultra ATA100 interfaces via 40-way boxed header
Device Types Supports ATAPI, LS120 and ZIP drives
Floppy Types Supports standard 3.5" and 3-mode floppy drives
Operating Systems Windows 2000
XP
XPe
Linux
Others upon request
Safety Compliance Evaluated in accordance with UL60950, EN60950 and IEC60950
EMC Compliance Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B

Physical Specifications
Environment Temperature Operating 0˚C to 55˚C
Storage -40˚C to 85˚C
Relative Humidity 5% to 95% non-condensing

Ordering Information

Call for pricing and availability. Refer to the order codes below.

DESCRIPTION:

LS855 with 82551ER Ethernet controller (without WoL) and no processor, RoHS
Product Code: LS1L03-0-0

LS855 with 1.6GHz Pentium M, RoHS
Product Code: LS1L03-P16-0

LS855 with 1.6GHz Pentium M and 512MB memory, RoHS
Product Code: LS1L03-P16-512

LS855 with 82551QM Ethernet controller (with WoL) and no processor, RoHS
Product Code LS1W03-0-0

LS855 with 1.8GHz Pentium M 745, RoHS
Product Code: LS1W03-P18-0

I/O Shield
Product Code ATX-L BG IOSHLD

Embedded Processor Support
1.3GHz Celeron M Processor 320
1.6GHz Pentium M Processor 725
1.8GHz Pentium M Processor 745

Find Your Product

Resources

Support Downloads

Support Downloads

Select your product below.




Access Global Support

Telecom and Commercial
Convedia Media Servers
Application Software

Contact RadiSys

Image: Contact icon

Choose one of the contact options below.



Tel: (503) 615 - 1100
Toll-Free: (800) 950-0044
Fax: (503) 615 – 1115